Reference:
18103
Categories:

Kit SkyPanel + Chinese Ball + Tripod + Arm (3m)

260.00 + IVA /day

With this Kit you’ll have everything to provide secure support for a Skypanel on uneven terrain and surfaces like stairs, with a light-shaping chinese ball.

Articles included in this rental

  • 1 Arri SkyPanel S60-C
  • 1 V-mount Batteries Adapter
  • 1 Chinese Ball – DoPchoice Snapbag Lantern 3′
  • 1 Avenger Junior Boom Arm 3m with a counterweight
  • 1 Avenger Combo Steel Stand 45 with Leveling Leg (4.5 m)
  • Sandbags

Rent this item

The selected dates should refer to the dates when the equipment is used, excluding the picking and returning dates. Special conditions for long term rentals. Contact us

Additional Information

Please click the links in the left to consult the specs and general description of each item included in this Kit.

ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-C LED Softlight. Supported by a steel yoke, the panel surface area measures 25.4 x 11.8″ and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPort outputs the equivalent of a 2,000W tungsten soft light while drawing a maximum of only 450W.

Using technology originally designed for the L7-C Fresnel, the SkyPanel S60-C is fully color “tuneable” allowing output of a warm 2,800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full Minusgreen to Full Plusgreen is also possible, so if you’re lighting for blue or greenscreen, you can simply dial your color chosen in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions as well as 0-100% dimming can be adjusted locally with the SkyPanel’s onboard controller or remotely via DMX or a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive, PC or Mac.

The SkyPanel S60-C can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8″) pin and a standard diffuser. This version of the light has a manual yoke and comes with an Edison power cord.

Fully Tuneable, Precise Color Rendering
Incorporating features of ARRI’s successful L-Series LED Fresnels, the SkyPanel is one of the most versatile soft lights on the market, as well as one of the brightest. Like the L-Series, SkyPanel “C” (Color) versions are fully tuneable, meaning that correlated color temperature is adjustable between 2,800K and 10,000K, with accurate color rendition over the entire range. Full plus and minus green correction can be achieved with the simple turn of a knob, and in addition to CCT control, vivid color selection and saturation adjustment is also possible. Applications for this controllability range from quickly adjusting the CCT to set the mood of a scene, to selecting the chroma green output for green screen color keying. Each LED light engine is computer calibrated in order to ensure unit-to-unit and batch-to-batch consistency, as well as accurate color temperatures
True Soft Light Beam Quality
Soft lights are known for their smooth quality of light and even, uniform beam field. SkyPanel’s combination of a precise selection of diffusion panels, LED mixing chamber and large surface area allow for the light output to wrap around objects, eliminating sharp shadows and making for an ideal beauty light. The beam field is homogeneous in both color and intensity
Natural Shadow Rendition
Mixing some 2,000 calibrated red, green, blue and white LEDs into one homogeneous beam of soft light, the SkyPanel produces not just impressive light quality, but excellent shadow rendering as well. The soft shadows cut cleanly without exhibiting multiple edges or color fringing
Versatility Built-In
While the SkyPanel was designed to be used primarily as a soft light to illuminate people, various built-in features make it extremely adaptable to other uses. The diffuser panels on the front of the lamp head are interchangeable, so going from the Heavy to the Lite diffusion panel can be done in a matter of seconds. With the onboard battery input, SkyPanel can be run off industry-standard batteries. The S60 can be operated at up to 50% of its total power on battery power The SkyPanel also makes an effective space light outputting a large downward-directed pool of color controllable soft light through an optional silk cylinder
Built to Last
Made in Germany to ARRI standards, the SkyPanel is constructed from resilient materials and assembled by hand. The combination of an aluminum core with fiberglass-reinforced thermoplastics results in a solid fixture that can withstand heavy daily use on busy film sets. The easily-serviced electronics have been designed to last beyond a minimum of 25,000, up to a maximum of 50,000 hours while the LED light engine even allows for recalibration
Highly Controllable
The SkyPanel user interface is designed for ease of use with a wide range of controls available to the user. Three simple knobs adjust the color temperature, green/magenta balance, light intensity and hue and saturation instantly. In addition to the on-board controls, all functions can be remotely adjusted via DMX or LAN network connections
Photometrics
At 16.4′ (5.0m)
At 3,200K
With Standard Diffusion: 393 lux/ 37 fc
With Lite Diffusion: 462 lux/ 43 fc
With Heavy Diffusion: 320 lux/ 30 fc
With Intensifier: 511 lux/ 47 fc
At 5,600K
With Standard Diffusion: 416 lux/ 39 fc
With Lite Diffusion: 489 lux/ 45 fc
With Heavy Diffusion: 338 lux/ 31 fc
With Intensifier: 541 lux/ 50 fc

 

ARRI S60 Specs

Light Fixture
Beam Angle 115°
Color Temperature 2800 to 10,000K ± 100K (With 200K Shift over Lifetime)
Color Accuracy Standard CRI 95
Cooling System None
Dimming Yes, 0 – 100% (Continuous)
Display None
Housing Material Not Specified by Manufacturer
Lumens Not Specified by Manufacturer
Photometrics Not Specified by Manufacturer
Expected Lamp Life 50,000 Hours
Rectangular Panel Size 25.4 x 11.8″ / 64.5 x 30 cm
Fixture Dimensions 27.0 x 17.0 x 5.2″ / 688.0 x 433.0 x 133.0 mm
Fixture Weight 26.5 lb / 12 kg
Connectors
Battery Plate Not Specified by Manufacturer
Power Input Connector 3-Pin XLR
DMX Connector 5-Pin XLR, EtherCON
Service Connector USB Type-A
Mounting
Yoke Mount TVMP/ Hex Bolt
Fixture Mount 1-1/8″ Stud
Accessory Mount None
Yoke
Yoke Material Steel
Yoke Type Not Specified by Manufacturer
Remote Operation
Remote Control Type DMX
Power
AC Input Power 90 to 250 VAC, 50 / 60 Hz
DC Input Power 48 VDC
Power Source AC, External Battery
Max Power Consumption Not Specified by Manufacturer
Cable
Cable Type powerCON to NEMA 5-15
Power Supply
Power Supply Power Connector powerCON
Power Supply Weight 11 lb / 5.0 kg
Physical
IP Rating IP20
Operating Temperature -4 to 113°F / -20 to 45°C

 

Chinese ball – DoPchoice Snapbag Lantern

The SnapBag Lantern is another light-shaping product that is designed to be versatile enough that you can use it with a wide choice of lighting fixtures. The SnapBag lantern can act as a lantern, china ball, or even a conventional soft box if need be. It’s a soft space light source and its circular pattern provides a pleasant round eye reflection when used as a key light. When combined with Rabbit-Ears, set up is simple. Lantern works with the Mini, Rectangular, Gemini, and Astra versions, and so it fits a variety LED fixtures from ARRI, BB&S Lighting, Cineo, Creamsource, Kino Flo, Litepanels, Lupo, and Velvet.

Avenger Junior Boom Arm 3m with a counterweight

Boom arms allow you to position your lights to reach the most difficult positions. This junior boom arm can support a payload up to 40kg at its minimum extent, and up to 10K at 3m, its maximum extent. It also includes a strong steel counterweight for smooth operation and stability with 6.8 Kg. Mount this Avenger D650 Boom Arm to the top of a heavy duty stand to hold a small or medium light fixture with umbrella or softbox.

Weight

14800 g

522 oz /

Arm Tube Diameters

35, 40 mm

1.38- 1.57 in

Attachment (bottom)

1 1/8″ (28mm) stud

1 1/8″ (28mm) stud

Top Attachment

1 1/8″ (28mm) socket, 5/8″ (16mm) stud

1 1/8″ (28mm) socket, 5/8″ (16mm) stud

Boom Max extension

300 cm

118.11 in

Boom Min extension

163 cm

64.17 in

Color

Silver

Silver

Material

Steel

Steel

Max Payload with maximum extension

Max Payload with minimum extension

10 kg

40 kg

22.05 lbs

88,2 lbs

Sections – Boom Arm

2

2

Avenger Combo Steel Stand 45 with Leveling Leg (4.5 m)

The 14.7′ Avenger Combo Steel Stand 45 with Leveling Leg is a chrome-plated heavy duty light stand that features a leveling leg with an adjustable extension that lengthens it to provide secure support of equipment on uneven terrain and surfaces like stairs. The stand has 3 risers with a maximum height of 14.7′. The A1035B has a combo 5/8″ Baby top stud and 1 1/8″ female Junior receiver.

 

Load Capacity 88.2 lb / 40 kg
Mounting Options 5/8″ Stud
1-1/8″ Receiver
Number of Sections 4
Column Diameter 1.77″ / 4.5 cm
1.57″ / 4.0 cm
1.38″ / 3.5 cm
Maximum Working Height 14.75′ / 4.5 m
Minimum Working Height 5.9′ / 1.8 m
Collapsed Height 61.02″ / 1.55 m
Footprint Diameter 52.76″ / 1.34 m
Leg Shape Square
Accepts Wheels Yes
Air Cushioned No
Detachable Base No
Leveling Leg Yes
Reverse Legs No
Finish Chrome
Material Steel
Weight 28.6 lbs / 13 kg

The sandbags are an essential part of any set or stage. Uses include securing light stands and booms, dolly stop on track shot and a “bean bag” for cameras or long lenses.

DoPchoice Lantern