Teradek Bolt 6 LT 750 1TX/2RX — 4K Wireless Video Transmission (230 m)

190,00  + IVA /day

Transmit and receive lossless HD video from up to 750′ line of sight with the Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit from Teradek. The kit includes a wireless Bolt 6 LT 3G-SDI/HDMI transmitter and wireless Bolt 6 LT 3G-SDI/HDMI receiver, which support the new 6 GHz wireless frequency, feature bright OLED displays, and can wirelessly receive up to UHD 4K30 video with 10-bit 4:2:2 HDR support.

The transmitter inputs video over 3G-SDI or HDMI and features 3G-SDI and HDMI loop outputs, and the receiver outputs video via 3G-SDI and HDMI. Both units are compatible with all Bolt 4K models using the 5 GHz wireless band.

Articles included in this rental

  • 1× Teradek Bolt 6 LT 750 TX (Transmitter)
  • 2× Teradek Bolt 6 LT 750 RX (Receiver)
  • 1× Lightstand Adapter 1/4″-20
  • 1× Hot Shoe Adapter
  • 2× 2-pin to PowerTap Cables
  • 3× Spiral 3G SDI BNC-to-BNC (7.9 in / 20 cm) Cables
  • 3x HDMI-to-HDMI (7.9 in / 20 cm) Cables
  • 2× PSU (2-pin to 30 W AC Adapter – 1.8 m Cable)
  • 12× 2 dBi Rigid V Antennas (4.9–7.3 GHz RP-SMA)
  • 2× USB 2.0 Type-A to USB-C Cable
  • 1× Teradek Hard Case (Large – Fits 1TX + 2RX + Accessories)

Rent this item

The selected dates should refer to the dates when the equipment is used, excluding the picking and returning dates. Special conditions for long term rentals. Contact us

Additional Information

Quick Features

  • Compatible with Bolt 6 series devices using the newly available 6 GHz frequency band
  • Cross-compatible with all Bolt 4K, Bolt 4K LT, and Bolt 4K Monitor Module series devices over the 5 GHz signal spectrum
  • Input video up to UHD 4K30 4K via HDMI and transmit up to 4K30 video; input up to 1080p60 via SDI; SDI loop output
  • SDI Eye Pattern Tool to check SDI cable integrity
  • Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut
  • Improved “long range” mode
  • Small and lightweight chassis design
  • Transmit to up to six Bolt 4K or Bolt 6 series receivers
  • AES-256 encryption support
  • Wireless iOS/Android app via Bluetooth features a spectrum analyzer and remote configuration
Inputs/Outputs
Antenna I/O
Transmitter: 2x RP-SMA Female
Receiver: 5x RP-SMA Female
Video I/O
Transmitter: 1x HDMI 1.4b Input
Transmitter: 1x BNC (3G-SDI) Input
Transmitter: 1x BNC (3G-SDI) Loop Output
Receiver: 1x HDMI 1.4b Output
Receiver: 1x BNC (3G-SDI) Output
Embedded Audio
HDMI Input: 2-Channel
SDI Input: 2-Channel
Audio I/O
No
Power I/O
Transmitter/Receiver: 1x LEMO 2-Pin Input
Other I/O
Transmitter/Receiver: 1x Micro-USB Input
Encryption
Yes: 256-Bit AES
Wireless
Wireless Range
750′ / 228.6 m (Line-of-Sight)
Channel Bandwidth
40 MHz, 20 MHz
Frequency Range
Non-DFS Frequencies
US: 5.94 to 6.42 GHz
US: 5.19 to 5.23 GHz
US: 5.75 to 5.79 GHz
DFS Frequencies
US: 5.27 to 5.67 GHz
Latency
0 ms
RF Power
23 dBm
Wi-Fi
No
Bluetooth
Yes
Mobile App Compatible
Yes: Android & iOS
Cellular Support
No
Format Support
Video Format
HDMI (10-Bit 4:4:4/4:2:2 RGB, YCC)
UHD 4K: 30/29.97/25/24/23.98
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50
480p: 60/59.94
576i
480i: 59.94
SDI (10-Bit 4:4:4/4:2:2 RGB, YCC)
1080p: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50
576i: 50
480p: 60/59.94
480i: 59.94
Audio Format
2-Channel 24-Bit 48 kHz
Timecode Support
Yes
Power
Input Power
6 to 28 VDC
Battery
Transmitter/Receiver: Interchangeable Mount (No Plate Included)
Power Consumption
Transmitter: 9 W
Receiver: 11 W
Mounting
Tripod/Accessory Mounting
Transmitter/Receiver, Bottom
1x 1/4″-20 Female
1x 3/8″-16 Female
General
Status Display
On Transmitter & Receiver
Environmental Resistance
No
Operating Conditions
32 to 104°F / 0 to 40°C
Material of Construction
Aluminum, Polycarbonate
Dimensions
Transmitter: 4.1 x 2.4 x 1.3″ / 103 x 60 x 33 mm
Receiver: 4.8 x 3.7 x 1.1″ / 122 x 94 x 27 mm
Weight
Transmitter: 7.27 oz / 206.00 g
Receiver: 10.30 oz / 292.00 g
Teradek Bolt 6 Overview and Features