Kits Blackmagic URSA Broadcast G2 Studio SDI

Studio camera channel on 12G-SDI: the Blackmagic URSA Broadcast G2 with the URSA Studio Viewfinder and the Fujinon ZA17x7.6 zoom. Feed the ATEM programme return into the camera’s SDI input and you get remote camera control (iris, gain, white balance, colour corrector), tally on the viewfinder and talkback over the same cable — no fibre converters needed. The right pick for studio floors, podcast and talk-show sets and event stages within coax reach of the switcher. For long cable paths or OB positions, see our SMPTE Fibre Chain kit; for shoulder work, the Portable kit.

Included in this kit

• 1x Blackmagic URSA Broadcast G2 body — 2/3″ 4K UHD up to 60p with the B4 mount, built-in ND filters, 12G-SDI in/out, 2x XLR, CFast 2.0 / SD UHS-II / USB-C recording, Blackmagic RAW and ProRes
• 1x Blackmagic URSA Studio Viewfinder — 7″ screen with sun hood, tally light and camera status display, for pan-bar operation
• 1x Fujinon ZA17x7.6BERD B4 broadcast zoom — 17x, 7.6–129 mm (15.2–258 mm with the 2x extender), servo zoom grip
• 1x Blackmagic Focus Demand + 1x Blackmagic Zoom Demand — rear lens controls on the pan bars
• 1x Sachtler Video 20 III Fluid Head + Carbon Fiber Tripod (100 mm) — this model or an equivalent tripod, subject to availability
• Transport case

Other lenses: this kit is also available with the Fujinon XA20sx8.5 (20x), the LA30x7.8 4K (30x) and the UA14x4.5 4K wide-angle (14x) — use the buttons above.

Recommended extras: 12G-SDI cabling; a pedestal instead of the tripod on request.

Not included: SDI cabling, V-Mount batteries or 12 V power, media.

Need setup or operation? Camera operators and broadcast technicians available for multicamera production — camera build, lens and viewfinder setup, shading and live operation on request. Ask for it when requesting your quote.

Studio camera channel on 12G-SDI: the Blackmagic URSA Broadcast G2 with the URSA Studio Viewfinder and the Fujinon XA20sx8.5 zoom. Feed the ATEM programme return into the camera’s SDI input and you get remote camera control (iris, gain, white balance, colour corrector), tally on the viewfinder and talkback over the same cable — no fibre converters needed. The right pick for studio floors, podcast and talk-show sets and event stages within coax reach of the switcher. For long cable paths or OB positions, see our SMPTE Fibre Chain kit; for shoulder work, the Portable kit.

Included in this kit

• 1x Blackmagic URSA Broadcast G2 body — 2/3″ 4K UHD up to 60p with the B4 mount, built-in ND filters, 12G-SDI in/out, 2x XLR, CFast 2.0 / SD UHS-II / USB-C recording, Blackmagic RAW and ProRes
• 1x Blackmagic URSA Studio Viewfinder — 7″ screen with sun hood, tally light and camera status display, for pan-bar operation
• 1x Fujinon XA20sx8.5BERM B4 broadcast zoom — 20x, 8.5–170 mm (17–340 mm with the 2x extender), servo zoom grip
• 1x Fujinon FSD-11 Focus Servo Demand + 1x Fujinon SRD-92B Zoom Rate Demand — rear lens controls on the pan bars, matched to the XA20 servo
• 1x Sachtler Video 20 III Fluid Head + Carbon Fiber Tripod (100 mm) — this model or an equivalent tripod, subject to availability
• Transport case

Other lenses: this kit is also available with the Fujinon ZA17x7.6 (17x), the LA30x7.8 4K (30x) and the UA14x4.5 4K wide-angle (14x) — use the buttons above.

Recommended extras: 12G-SDI cabling; a pedestal instead of the tripod on request.

Not included: SDI cabling, V-Mount batteries or 12 V power, media.

Need setup or operation? Camera operators and broadcast technicians available for multicamera production — camera build, lens and viewfinder setup, shading and live operation on request. Ask for it when requesting your quote.

Studio camera channel on 12G-SDI: the Blackmagic URSA Broadcast G2 with the URSA Studio Viewfinder and the Fujinon LA30x7.8 4K 30x zoom. Feed the ATEM programme return into the camera’s SDI input and you get remote camera control (iris, gain, white balance, colour corrector), tally on the viewfinder and talkback over the same cable — no fibre converters needed. The right pick for studio floors, podcast and talk-show sets and event stages within coax reach of the switcher. For long cable paths or OB positions, see our SMPTE Fibre Chain kit; for shoulder work, the Portable kit.

Included in this kit

• 1x Blackmagic URSA Broadcast G2 body — 2/3″ 4K UHD up to 60p with the B4 mount, built-in ND filters, 12G-SDI in/out, 2x XLR, CFast 2.0 / SD UHS-II / USB-C recording, Blackmagic RAW and ProRes
• 1x Blackmagic URSA Studio Viewfinder — 7″ screen with sun hood, tally light and camera status display, for pan-bar operation
• 1x Fujinon LA30x7.8BRM B4 4K broadcast zoom — 30x, 7.8–234 mm, servo zoom grip; the long lens for sports and stage work
• 1x Blackmagic Focus Demand + 1x Blackmagic Zoom Demand — rear lens controls on the pan bars
• 1x Sachtler Video 25 Plus Tripod + Fluid Head — this model or an equivalent tripod, subject to availability
• Transport case

Other lenses: this kit is also available with the Fujinon ZA17x7.6 (17x), the XA20sx8.5 (20x) and the UA14x4.5 4K wide-angle (14x) — use the buttons above.

Recommended extras: 12G-SDI cabling; a pedestal instead of the tripod on request.

Not included: SDI cabling, V-Mount batteries or 12 V power, media.

Need setup or operation? Camera operators and broadcast technicians available for multicamera production — camera build, lens and viewfinder setup, shading and live operation on request. Ask for it when requesting your quote.

Studio camera channel on 12G-SDI: the Blackmagic URSA Broadcast G2 with the URSA Studio Viewfinder and the Fujinon UA14x4.5 4K wide-angle zoom. Feed the ATEM programme return into the camera’s SDI input and you get remote camera control (iris, gain, white balance, colour corrector), tally on the viewfinder and talkback over the same cable — no fibre converters needed. The right pick for studio floors, podcast and talk-show sets and event stages within coax reach of the switcher. For long cable paths or OB positions, see our SMPTE Fibre Chain kit; for shoulder work, the Portable kit.

Included in this kit

• 1x Blackmagic URSA Broadcast G2 body — 2/3″ 4K UHD up to 60p with the B4 mount, built-in ND filters, 12G-SDI in/out, 2x XLR, CFast 2.0 / SD UHS-II / USB-C recording, Blackmagic RAW and ProRes
• 1x Blackmagic URSA Studio Viewfinder — 7″ screen with sun hood, tally light and camera status display, for pan-bar operation
• 1x Fujinon UA14x4.5BERD B4 4K wide-angle zoom — 14x, 4.5–63 mm (9–126 mm with the 2x extender), servo zoom grip
• 1x Blackmagic Focus Demand + 1x Blackmagic Zoom Demand — rear lens controls on the pan bars
• 1x Sachtler Video 20 III Fluid Head + Carbon Fiber Tripod (100 mm) — this model or an equivalent tripod, subject to availability
• Transport case

Other lenses: this kit is also available with the Fujinon ZA17x7.6 (17x), the XA20sx8.5 (20x) and the LA30x7.8 4K (30x) — use the buttons above.

Recommended extras: 12G-SDI cabling; a pedestal instead of the tripod on request.

Not included: SDI cabling, V-Mount batteries or 12 V power, media.

Need setup or operation? Camera operators and broadcast technicians available for multicamera production — camera build, lens and viewfinder setup, shading and live operation on request. Ask for it when requesting your quote.